Get 5p in Smile Reward Points on every £1 spent via Denkauk*
[itemWebWizName]
Qty: [itemQuantity]
Ref: D1328
Used for the daily cleaning of aspirator systems, can be used on wet line, dry line and semi wet/dry line suction systems. Highly effective cleaning and disinfecting product. Non-foaming and non-abrasive aldehyde, chlorine and phenol free solution. Easy to use and measure. Effective against a wide spectrum of organisms. Alkaline based solution for removal of daily deposits. The 1 litre dispensing bottle dispenses the required amount of concentrate to ensure accurate dosage is used.
Add 20ml ± 1ml of concentrate to 980ml warm water (2% solution). Aspirate via the high and low volume suction tubes. Leave for a minimum of 15 minutes (to achieve full efficacy leave for 60 minutes) and then rinse thoroughly with clean water. Do not use on aluminium or copper parts. For professional use only.
EN14885, EN14476, EN14348, EN13727, EN13697, EN13624, ASTM E1052
Dimethyldioctylammonium chloride, Dipropylene glycol, 2-Aminoethanol, Tetrasodium ethylene diamine tetraacetate, Ethanol, Citric acid, Nonionic surfactant, Antifoam, Dye.