Oranwash L - 140ml

Ref: F640


Low viscosity C-Silicone. Ideal for two-stage technique, single-stage technique with two viscosities.

  • Orange flavour
  • Flowable consistency


  • Extrude the required quantity, observing the dosage scale on the mixing block.
  • Then dose a quantity of Zhermack Indurent Gel equal to the length of the fluid.
  • When using Zhermack Indurent Liquid, dose one drop of hardening liquid for each notch of fluid.


  • Mix energetically with the spatula, and then carefully spread the mixture out, pressing it over the mixing block to eliminate any air which may have been incorporated into the mixture.
  • Repeat this operation until the mix is even in colour.
  • Mixing time should ideally be about 30 sec.
  • Apply the mixture to the impression tray with a spatula or a syringe for elastomers. Working time c-silicones including mixing time is about 1 min. 30 sec.
  • Put into the oral cavity and wait for the mix to harden, which will take about 3 min. 30 sec.